1. Before installation all rims should be cleaned, all additional parts like: nut caps, or other covers should be also removed.

2.Before steel ring installation, try to fit wheel cover to rim. to be sure that it fits properly (no obstacles). Embossment in the steel ring have to be matched with embossment in wheel cover. (FIG 1).

3. Install wheel cover on rim, taking under consideration position of air valve and embossment in wheel cover.

All wheel cover mounting hooks have to be inside rim before pushing it further, to avoid breaking one of them.

Please check if wheel cover is installed properly it is not too loose or to tight to push it to the end). CAUTION: can Due to internal diameter of rims can be different, additional adjustment can be made. Steel ring diameter be adjusted by extension or compression.